The invention of the pump itself was a major breakthrough for mankind. Best simplified the way to obtain normal water. With growing demands for a stable water supply, largely free from pressure fluctuations, and at exactly the same time increasing demands on the power efficiency of buildings, pumps are now making their contribution as booster pumps. What their task is, how they function and what pressure switches do along the way is explained briefly and succinctly in this post.
What are booster pumps needed for?
A booster pump increases low water pressure and, with that, improves the flow rate. It offers an extra boost to create the water pressure to the required level. Booster pumps tend to be used in pipelines to improve the pressure and so to go the liquid along to another pump, and in addition for pumping in residential houses or large commercial buildings. An expansion vessel can extend a pressure booster system. Through the use of such an expansion vessel, the water pressure is additionally stabilised and thus improved.
Booster pumps functioning
The figure gives a synopsis of the various measuring points inside a pressure booster system:
1 Input pressure ? Pressure
2a Dry run protection ? Prize ? Level
3 Output pressure ? Pressure
4 Pump performance ? Differential pressure
So how exactly does a booster pump work?
Booster pumps are selected predicated on application demands. Instead of selecting one large pump, consider selecting multiple pumps with smaller horsepower. Booster pumps have an impeller that moves water that comes in through the inlet and exits through the outlet. A motor makes the impellers spin. The pumps differ in how they draw the water in and push it out. Many of them use a spinning propeller, others use an oscillating diaphragm or other pump principles.
What do mechanical pressure switches in booster pumps do?
The mechanical pressure switches in booster pumps are used for the direct control/monitoring of safety functions so that you can protect pumps with insufficient input pressure against dry running. An example of this can be the WIKA PSM-520 pressure switch.
Just how do mechanical pressure switches work?
The pressure element of the switch is really a resilient bellow which works against a spring mechanism having an adjustable pre-load force. On the spring mechanism there is a contact arm for actuating the change-over switch contact. The switch is actuated as soon as the force generated by the pressure in the pressure element is higher than the set pre-load force.
Note
Further information on the many measurement solutions which you can expect you for pumps and systems are available on the WIKA website. For those who have any questions, your contact will gladly assist you to.
Also read our articles
Mechanical pressure switches: How does one set the switch point?
Mechanical vs. electronic pressure switches: Functionality
Further blog posts on mechanical pressure switches