How TÜV SÜD are serving to to handle technical challenges
As part of the global drive to reduce greenhouse gas emissions there is a pressing want to move in the course of clean fuels for power. The use of hydrogen as a substitute for pure gas in the gas grid networks is seen as a significant contributor to assembly this objective. Manufacturers, fuel network corporations and governments are working closely together to deal with a number of technical challenges earlier than this change can become a reality. TÜV SÜD National Engineering Laboratory is a world-leading centre for flow metrology analysis and growth. To help address these challenges, it’s building a range of hydrogen checks facilities. เกจวัดแรงดัน4นิ้วราคา embody the Hydrogen Domestic Gas Metering Test Facility, developed for testing smaller scale equipment at decrease pressures, coupled with the development of a fuel primary circulate normal check facility, which offers decrease measurement uncertainty and greater options for elementary metrology research, as properly as greater hydrogen flow rate and stress ranges. This article describes the existing hydrogen take a look at facilities and people beneath improvement at TÜV SÜD National Engineering Laboratory.
The hydrogen domestic gas metering check facility has been developed to supply a platform to analyze not only the efficiency of flow meters, but in addition for different equipment associated to hydrogen operation, including management valves, PRVs, regulators, heat exchangers, and so forth. in a hydrogen service. The test facility has been developed for small scale purposes and can deliver a range of gasoline flows including hydrogen, methane, nitrogen or mixtures of hydrogen and methane. The take a look at facility is able to delivering up to 38 Sm3/h of hydrogen to the system underneath check at line pressures as a lot as 1500 mbar, with temperatures ranging from -25 to 55 ˚C. It can operate with line sizes starting from 5 to twenty mm. Construction was accomplished last yr and it is now obtainable to be used by industry for product improvement or circulate testing of hydrogen tools and valves.
The switch over from natural gas to hydrogen may take place in a staged strategy involving hydrogen/natural gasoline blends or direct switch to pure hydrogen. Manufacturers can carry out a whole evaluation of apparatus efficiency throughout a range of hydrogen to pure gas compositions from 0 to 100% hydrogen.
The hydrogen home fuel metering check facility has been specifically designed for low-pressure hydrogen applications and TÜV SÜD recognised that there was also a need for a bigger circulate, larger stress test facility. TÜV SÜD has undertaken a challenge under the BEIS-funded Flow Programme to determine a Gas Primary Flow Standard Test Facility. Initially, it’s going to function with hydrogen, nitrogen and methane however with a view to be extended to carbon dioxide. The facility is currently in the detailed design stage and the plan is to have an working envelope of as much as a hundred Sm3/hr of gasoline with the flexibility to function as much as 120 bar.
For more information on how TÜV SÜD National Engineering Laboratory might help with your valve circulate testing needs, contact Marc MacDonald on marc.macdonald@tuvsud.com
Share