A. Rigid Shaft Support Traditionally, plastic chemical pumps either have a single sided shaft assist or solely use plastic for a double-ended shaft assist. เพรสเชอร์เกจวัดแรงดันน้ำ with this is that beneath excessive temperature or pressure, the shaft support weakens resulting in shaft deflection and due to this fact vibrations main elevated put on and lowered service life. เกจวัดแก๊สหุงต้ม contains a patented integral V form front help that’s a part of the metallic casing armour after which PFA lined. The rear of the shaft is supported within the PFA lined containment shell and reinforced by a metal assist ring and high-strength carbon fibre composite cover. This superior design means a longer design life leading to far much less downtime and increased productivity.
B. Vacuum Resistant Lining The PFA lining is formed directly onto the metal armour and designed to make sure the PFA material remains adhered to the armour even under low absolute strain.
C. Load Balanced Volute The casing volute is designed to have an evenly distributed hydraulic pressure, offering a balanced radial loading on the impeller.
D/E. One piece, steel embedded impeller Traditionally, an ETFE or PFA mag drive pump might be fitted with a separate impeller and inside magnet. In functions of high stress or temperature, the impeller can deform leading to damages and reduced efficiency. The AME pump vary is constructed whereby the impeller and magnet capsule are shaped as one piece which eliminates the potential for the impeller loosening. For further operational stability and rigidity, a metallic construction is embedded from the magnet capsule to the impeller blade additional rising the pump’s operational life.
F. Simple Construction The stationary shaft design allows for a quite simple development which makes maintenance and repairs very simple.
G. Reinforced Containment Shell The plastic containment shell is strengthened with a carbon fibre composite cowl. There isn’t any eddy present loss, so no extra heating of the pumped chemical.
H. High Strength Magnetic Coupling Inner magnets are constructed from Samarium Cobalt (SmCo) to be able to withstand high operating temperatures with out experiencing demagnetization. High power neodymium (NdFeB) is then used for the drive magnet to supply high torque transmission.
I. Back Pull-Out Simple and quick maintenance entry with out the need to remove the pump casing from the piping.
J. ISO Standardised Designed to ISO 2858, ISO 5199, ISO 15783, and EN 809 requirements.
The AME vary are heavy-duty course of pumps designed with a metallic armour and excessive purity PFA-lining to deal with the hardest functions and for transferring excessive purity aggressive chemical compounds. Designed to ISO 2858 standards, these magnetic drive pumps are constructed for dependable and leak-free operation in probably the most arduous of applications with temperatures <150°C due to the patented structural design.
Would you want to discuss further? Then call us on 01425 627700 or get in touch on info@crestpumps.co.uk.
Share